PCI Receiver, Multiband RF, Single Channel 

Features

  • Multiband Coverage
    • E/S Band 2185 – 2485 MHz
    • L Bands 1429 – 1545, 1700 – 1850
    • C Band Ready, Other Bands Available
  • 6 dB Typical Noise Figure
  • -100 to -10 dB Dynamic Range
  • AFC Tracking +/- 500 kHz
  • Wide IF Bandwidth, 50 kHz to 30 MHz
  • All Standard IRIG Filters
  • FM/PM/BPSK/QPSK Demods
  • Supports ARTM Tier I and II
  • AM Demodulator with 4 Filter Settings
  • Selectable AGC Output Ranges
  • Integrated Spectral Analysis Display
  • Bit Synchronizer Option
  • Programmable IF to Tape Output Option

Tri-Band Tuner
Wyle Telemetry and Data Systems’ tri-band digital tracking telemetry receiver is ideally suited for embedded telemetry applications. The standard PREC-1011 includes the most popular telemetry bands: Lower-L, Upper-L, and the E/S bands, and because it is completely digital, it does not require calibration. The RF front end sensitivity permits operation with signal levels as low as -100 dBm. A 70 MHz down-converter input is also provided.

Digital Filters
Digital finite impulse response (FIR) and decimation filters minimize signal insertion loss and allow for support of 25 preset IF filter bandwidths and 23 video post-detect bandwidths. User-defined filter bandwidths are also available.

Multimode Demodulators
Included with the user-selectable FM/PM/BPSK/QPSK demodulator, which comes with adjustable outputs, is a noncoherent envelope AM demodulator with four low pass filter settings.

AGC
Receiver RF amplifier modes include manual gain control and automatic gain control (AGC) with an AGC freeze control. Provided with the PREC-1011 are five AGC time constants and AGC output, which operates in three modes: 0 to -5V, 0 to +5V with 20 dB/volt, and 0 to +4 volts with 25 dB/volt.

AFC & Tracking
The PCI Receiver provides for +/-500 kHz tracking with 10 kHz/step tracking response. Tracking modes are +, -, and auto track. It also supplies direction and offset information.

Spectral Data Displays
Support is included for an integrated IF spectral display and for a baseband demodulator data display. The included Windows graphical user interface provides receiver controls and indicators and includes the IF spectral and baseband data displays.

Software
The PREC-1011 includes a Windows DLL and user application for configuration and card operation. Linux drivers and C/C++ User Mode library are also available.

Tuner

 

 

     Input

 

 

Frequency Range

 

Lower-L band 1429 – 1545 MHz

Upper-L band 1700 – 1850

S-band   2185 – 2485 MHz; C-band ready

Others are available.*

 

Resolution

50 kHz steps, tuning resolution

 

IF Bandwidth

 

Presets provided for 25 IF filter settings: 50 kHz, 100 kHz, 150 kHz, 300 kHz, 375 kHz, 500 kHz, 750 kHz, 1 MHz, 1.3 MHz, 1.5 MHz, 2 MHz, 2.4 MHz, 3 MHz, 3.3 MHz, 4 MHz, 5 MHz, 6 MHz, 7.5 MHz, 10 MHz, 12 MHz, 15 MHz, 20 MHz, 22 MHz, 25 MHz, and 30 MHz
Others are available.*

 

Dynamic Range

-100 dBm to -10 dBm

 

IF Rejection

> 70 dB

 

Noise Figure

+8 dB maximum, +6 dB typical

 

Maximum

+10 dBm

 

Lock Threshold

4 dB Eb/N0

 

Nominal Impedance

50-ohm

 

Spurious Rejection

>60 dB

 

AFC Tracking

+/- 500 kHz of programmed center frequency with 10 kHz frequency resolution

 

AGC Control

ON/OFF manual setting

 

AGC Time Constant

0.1 ms, 1 ms, 10 ms, 100 ms, or 1.0s, selectable

 Output

AM

 

AC coupled AGC detector output

5 Hz, 500 Hz, 5 kHz or 50 kHz low pass filter

 

AGC

0 to -5V, 0 to +5 VDC, (1V/20 dB); 0 to +4 VDC (1V/ 25 dB)

 

Down Converter

RF Buffered 70 MHz

Demodulator

 

 

   Input

Type

Multimode providing FM, PM, BPSK, QPSK, AM

ARTM Tier I and Tier II also available

 

 

 

Data Rates

 

FM performance 30 Mbps or 30 MHz

PM performance 20 MHz

 

 

Loop Bandwidth

100 Hz to 20 kHz

   Output

Filter Range

Presets provided for 23 standard video filters: 150 kHz, 187.5 kHz, 250 kHz, 357 kHz, 500 kHz, 750 kHz, 1 MHz, 1.2 MHz, 1.5 MHz, 1.65 MHz, 2 MHz, 2.4 MHz, 2.5 MHz, 3 MHz, 3.3 MHz, 3.75, MHz, 4  MHz, 5 MHz, 6 MHz, 7 MHz, 7.5 MHz, 10 MHz, and 15 MHz Other  filters are available*

 

Level

Programmable level from 1.0 to 9.0 Vp-p; offset adjustable

   Connectors

RF Input

SMA

 

IF Output

70 MHz, SMA

 

Reference Input

10 MHz Ref in SMA

 Environmental

Temperature

 

0 to + 50 °C, operating

-20 to + 60 °C, nonoperating

 

Humidity

0-90%, noncondensing

*Please contact Wyle Telemetry and Data Systems for more information. Our contact information is located in the footer.

 

Ordering Codes

 

 

 

PREC-1011M-201

PCI Receiver, Tri Band, FM/PM/BPSK/QPSK/AM Gen 2

 

PREC-1011-AC-xx

PCI Receivers: Single Band, FM/PM/AM and Tri-Band, FM/PM/AM

 

PREC-101C-201

PCI Receiver/Combiner, Tri-Band, Digital Demodulator, FM/PM/BPSK/QPSK/AM

 

PREC-1011M-OEM

PCI Receiver OEM Version

This is a partial list of our Receiver product line. Please contact us if you would like a complete list.