PCM Input and Output Submodules PCM-405-02 and PCM-406-02 

Features

•    Accepts PCM to 25 Mbps
•    Multiple Signal Level Interfaces
•    Complete Data and Clock Reconstruction
•    Internal Bit Synchronizers Available

Introduction

The IMUX PCM Input and Output cards support data rates of up to 25 Mbps in formats that exceed the IRIG 106-93 Class II configurations.  The PCM modules plug into the IMUX-323 and -324 Quadraplex boards in both the airborne and laboratory chassis.  Input and output signal levels and impedance are selectable. Both 0° and 180° clocks are supported on the input and output modules. Data recording, which is supported by the PCM Input and Output modules, ensures that all data is captured and not a single bit is lost.  Viterbi cards and bit synchronizer modules are also available.  Over 500 bit synchronizers are in the field today operating from 100 bps to 40 Mbps. 

 

Inputs

Sources

Single channel per mode

(PCM-405-02)

Data Source

NRZ-L Data and 0° clock or 180° clock

 

Data Impedance

Selectable; 75 (low) and 10,000 (high) ohms TTL,

 

 

120 ohms RS-422

 

Signal Levels

TTL (data and clock)

 

 

Differential RS-422 (data and clock)

 

 

Differential ECL (data and clock)

 

Input Codes

NRZ-L

 

Operating Range

DC to 20 Mbps

 

Input Stability

Burst or isochronous

 

Outputs

Serial Data Output

NRZ-L

(PCM-406-02)

Output Drive

TTL into 75 ohm, ECL & RS-422

 

Data to Clock Skew

Less than 10 nanoseconds

 

Parallel Data Output

24- or 32-bit data, 8-bit tag to GME bus

 

Clock

0° or 180°

 

Electrical and

Form Factor

IMUX Quadraplex Single Submodule

Environmental

Connectors

Motherboard I/O

 

Operating Temperature

32 °F - 158 °F (0 °C - 70 °C)

 

Storage Temperature

14 °F - 185 °F (-10 °C - 85 °C)

 

Operating Altitude

0 – 10,000 feet (0 – 3,100 meters)

 

Storage Altitude

-1,000 to 20,000 feet (-300 – 6,200 meters)

 

Humidity

20 to 95% noncondensing

 

 

 

Ordering Codes

PCM-405-02

PCM Input, 32 Mbps

 

PCM-406-02

PCM Output, 32 Mbps